鲜花装饰纸生产工艺
发布时间：2019-06-08 17:53
【摘要】：分析进口纸样的纤维形态、组成及配比;测定纸样各项物理性能指标;探讨鲜花装饰纸的生产工艺。结果表明:鲜花装饰纸最佳工艺条件为:打浆度为针叶木浆64°SR,麦草浆53°SR,纤维配比70∶30;花瓣的选择以颜色鲜艳、花瓣面积不超过1cm2的风干花瓣较好,花瓣用量8%,浆料上网浓度0.70%;阳离子淀粉用量1.5%,其加入方式为花瓣置于阳离子淀粉中处理后再与纸浆混合,与浆料混合作用时间为10min。鲜花装饰纸抗张指数55.85N·m·g-1,撕裂指数8.36mN·m2·g-1,耐破指数267.8kPa·m2·g-1,耐折度221次。基本达到了进口纸样水平。
[Abstract]:The fiber morphology, composition and proportion of imported paper samples were analyzed, the physical properties of the samples were determined, and the production technology of flower decorative paper was discussed. The results showed that the optimum technological conditions of flower decorative paper were as follows: beating degree was 64 掳SR, wheat straw pulp 53 掳SR, fiber ratio 70 鈮，
本文编号：2495466
[Abstract]:The fiber morphology, composition and proportion of imported paper samples were analyzed, the physical properties of the samples were determined, and the production technology of flower decorative paper was discussed. The results showed that the optimum technological conditions of flower decorative paper were as follows: beating degree was 64 掳SR, wheat straw pulp 53 掳SR, fiber ratio 70 鈮，
本文编号：2495466
本文链接：https://www.wllwen.com/wenyilunwen/shinazhuanghuangshejilunwen/2495466.html
